Signal Integrity Journal Webinar Series

Title: Debugging EMI Issues for Wireless and IoT Products Using an Oscilloscope

Date: April 12, 2022

Time: 8am PT / 11am ET

Presented by: Kenneth Wyatt, Principal Consultant, Wyatt Technical Services LLC

Sponsored by:

Abstract:
Many product designers are incorporating wireless functionality into new or existing designs. In many cases, on-board (or self-generated) EMI from digital bus, clocks or DC-DC converters couples throughout the board. If the product uses wireless, GPS, or cellular technologies, the EMI from these on-board sources often interferes with the receiver sensitivity of the wireless modules causing poor connectivity. This presentation describes a standardized method for characterizing and debugging these on-board EMI sources by using an oscilloscope - an instrument available to most designers.

Presenter Bio: 
Kenneth Wyatt is principal consultant of Wyatt Technical Services LLC, as well as past senior technical editor for Interference Technology Magazine (2016 to 2018). He is based in Colorado and has worked in the field of EMC engineering for over 30 years with a specialty in EMI troubleshooting and pre-compliance testing. He trains and speaks internationally, is widely published, and is the co-author of the popular EMI Troubleshooting Cookbook for Product Designers and newly-released and affordable three-volume set of books on benchtop EMC troubleshooting and pre-compliance testing.

Please note:
By registering for this webinar, the details of your profile may be used by Signal Integrity Journal™, the presenter, and the sponsor to contact you by email.