If you find any of these videos of value, you will want to purchase this textbook to gain that fundamental understanding all engineers need to excel as designers.

Here is a link to get instant quotes on PCB fabrication - page 123: https://www.pcbway.com/

View this video in which I walk you through how to evaluate the fabrication capabilities of fab shops - page 123.

Get the Saturn PCB tool here: https://saturnpcb.com/saturn-pcb-toolkit/

View this video in which I walk you through using the Saturn PCB tool - page 130.

In this video, I do an experiment to blow up some traces and measure the current carrying capacity of 6 mil wide traces. I also show what thermal runaway looks like - page 140.

In this video, I walk through the principle of sheet resistance and why it is such a useful term to characterize copper sheets and to estimate trace resistance page 152.

In this video, I walk you through the 2-wire and 4-wire methods of measuring resistance and how we can use the 4-wire method to measure very low resistances - page 156.

I walk you though a simple method of  reverse engineering the Thevenin voltage and resistance of two power sources - page 163.

Read this article on capacitor value selection - page 210.