If you find any of these videos of value, you will want to purchase this textbook to gain that fundamental understanding all engineers need to excel as designers.
In this video, I show how PDN noise is measured on a solderless breadboard and the role of decoupling capacitors - page 308.
Read this article on the myth of three capacitor values - page 335.
Read this article on testing for common signal integrity problems - page 379.
SMD names and pictures of packages can be found here - page 389.
Read this article on SMD and through hole parts - page 392.
Read this article on various SMD part labels - page 392.
Read this article from Topline about part names - page 392.
Read this article on IC packages and what is inside from Sparkfun - page 392.
Read this article on putting the naming of parts in perspective - page 395.
Here is a 51 Ohm resistor, cheap - page 398.
Here is a 51 Ohm resistor, expensive - page 398 .
In this video, I walk you through how to find that 1 in a million resistor - page 405.
In this video, I walk you through how to find that 1 in a million capacitor - page 408.
PDBway Gerber view can be found here - page 457.
Advanced circuits DFM checker can be found here - page 457.
DRC for electrical performance can be found here - page 457.
Read this article on 90 degree bends in circuit board traces - page 460.
Read this article on fab vendors will oftentimes add thieving pads, if requested, by Lee Ritchey - page 464.
Read this article on the myth of three capacitors - page 465.
Books - page 470:
Line taken from the famous movie, Casablanca - page 504.